Protection of bumper

Guanghzou Offroad introduce you that steel bumpers are made up of three parts: outer panel, cushion material and crossbeam. The outer plate and the cushioning material are made of steel. The beam is stamped with a cold rolled sheet of about 1.5 millimeters thick and formed into a U groove; the outer plate and the cushioning material are attached to the beam. The crossbeam is connected with the frame longitudinal beam, and can be dismantled at any time. The steels used for steel bumpers are generally made of two kinds of materials, polyester and polypropylene, which are made by injection molding.

Determine the position of a bumper with a corner indicator column

The marking on the corner of the bumper is the indicating column, and some companies also have the type of automatic expansion with motor drive. The corner indicator column can correctly confirm the corner position of the bumper, prevent the bumper damage, improve the driving technology, and often easily scratch the bumper, so it is better to put on a test. With this corner marker, the position of bumper can be correctly judged on the driver's seat, which is very convenient.

Two, the installation of corner rubber can reduce the damage of bumper

The corner of the bumper is the most vulnerable part of the car hull. People who feel bad driving can easily rub the edges and corners, and make them full of scars. The corner rubber that can protect this part is only OK on the corner of the bumper, and the installation is very simple. This method can lighten the damage degree of bumpers. Of course, if the rubber is bruised, replace the new one. In addition, the corner rubber is a very thick rubber pads attached to the corner of the bumper. If you want to have a sense of entirety with the car body, you can spray paint.

After a conclusion of Protection of bumper,have you guys learn something about that?Or you may wish knowing more of it.Please contact Guangzhou Offroad to get the details on protection of bumpers.